£10,000

SRX Power Cable

The technology for our new SRX power cord comes direct from our SR25 25th Anniversary power cord that was limited to 100 pieces worldwide. The SRX is an exact duplicate of the now sold-out SR25 with one exception, we are using a different grade of pure six-nines silver, and this cuts the cost of our reference power cord in half.

Each SRX power cord is fabricated by hand in our California factory including a flexible pure silver signal path ribbon laminate that acts as an Electromagnetic Cell running the full length of the cable from the wall plug to the IEC. Additional AC conductors are made from pure six-nines silver in an Air Dielectric for a total of nine gauge of pure silver each for the hot and neutral run. In every respect, the SRX represents the zenith of what we currently know on building the world’s state-of-the-art power cord.

SR technologies include the most advanced UEF shielding we have ever developed for a power cord and the most complex duel folded electromagnetic cells we have placed in a power cord made from pure six nines silver for both the hot and neutral AC leg. With a long flexible flat EM Cell and two folded EM Cells all made from pure six-nines silver, you have in effect a pure silver PowerCell line conditioner in an AC cable format.

What’s inside?

Additional SR25 technologies include a pure silver Ground Plane that can be connected to our Active Ground Block for a lower noise floor and added holographic sound staging and dynamic impact and a Swiss Made power supply developed to optimize the pure silver EM Cells. SRX has the exact same wall and IEC connectors developed for the SR25 made from Carbon Fiber and special Rhodium contacts selected in blind listening tests for their perfect sonic balance within the sound of the cable itself.

Each SRX power cord comes with two carbon fiber UEF Tuning Modules specially voiced for the SRX so you can strike the perfect balance between detail and musicality for your system. To voice SRX to your system listen to the Gold (warm) and the Silver (detail) bullet and select the option that makes music in your system. Needless to say, this is the most holographic, lowest noise floor and dynamic and musical power cord in our line-up. This power cord is exceptionally well suited for use with our PowerCell 12SE line conditioner as just one SRX can improve the performance of your PowerCell and this improves every connected component in your system.

Specifications

Construction:Each SRX AC Power Cable is made from 10 seperate power cables - 4 each High Current Pure Solid Silver Strings, 2 Pure Silver Air Strings, 2 each Pure Silver Air Ribbons, 1 each Pure Copper Mesh Ground Plane, 1 each Pure Copper Active Shield.
Dimensions:Standard 6 and 8 ft. lengths
4 each 14 awg. 99.9999% Pure Silver High Current:Dielectric: PTFE Air (Sealed) Shielding: Active Shielding Technology Geometry: 2 Channel Listened to determine signal direction before build
2 Each Silver Air String:Silver Air Strings: 99.9999% pure mono crystal silver conductor Dielectric: PTFE Air (sealed) Shielding: Active Shielding Technology Geometry: 2 Channel Listened to determine signal direction before build
2 each Pure Silver Air Ribbons :99.9999% pure silver conductor Dielectric: PTFE Air (sealed) Shielding: Active Shielding Technology Geometry: 2 Channel Listened to determine signal direction before build
1 each Pure Copper Ground Mesh :UEF Ground Plane Technology 36 square inches per 6 ft. length
Shielding :UEF Active Shielding 3rd generation, UEF Active EM Cell Swiss Made Power Supply SR Quantum Capacitors Point to Point Wiring Silver Solder 4%
Quantum Tunneling:Custom
5 Day burn in :3 Step process
Voltage and current rating :US: 20amp/125v International (EU/AU/UK): 16amp/250v
Shielding :UEF Active Shielding 3rd generation,
2 each SR 25 UEF Folded Electro-Magnetic Cells:Pure Copper Foils UEF: Graphene treated pcb Dielectric: PTFE Shielding: Active Shielding Technology Housing: Carbon Fiber Cylinder
1 each SR 25 Active Shielding UEF Cell:Modified Swiss-made DC bias Power Supply UEF: Graphene treated pcb SR Quantum Capacitors Dielectric: PTFE Shielding: Ground Plane Technology Housing: Carbon Fiber Cylinder
2 each SR 25 UEF Ground Plane:Pure Copper Foils UEF Graphene Dielectric: PTFE Conductive Carbon Fiber Ground Sleeve
1 each Black SR25 UEF Active Module:Completes Active bias circuit
1 each Gold SR25 UEF Tuning Passive Module:Optional voicing for increased warmth, liquidity
1 each Silver SR25 UEF Tuning Passive Module:Optional voicing for maximum information and refinement.
Connectors:Connector Input US: 1 each Synergistic Research G08 Pure Rhodium Connector Input Int’l: 1 each Synergistic Research G08 Pure Rhodium Schuko Connector Output US: Synergistic Research G08 Pure Rhodium IEC 15 amp and 20 amp connectors Connector Output Int’l: Synergistic Research G08 Pure Rhodium IEC 15 amp and 20 amp connectors
Build Notes:36 point-to-point hand soldered connections Hand laminated layers of Silver Ribbon, PTFE Film and Copper mesh Folded Hot and Neutral Electro-Magnetic Cells added before Power Supply UEF Ground Plane Sleeve added to EM Cells Additional UEF Ground Plane added to power supply SR25 UEF Treatment: UEF with Graphene added to entire cable 1 Termination for SR25 Active Tuning Module (Black) 1 Termination for SR25 UEF Passive Tuning Modules (Gold and Silver) Silver Solder: 4% Quantum Tunneling: Before the Active power supply is incorporated all connections and cabling are treated with 1,000,000 volts of electricity at specific frequencies and pulse modulations, creating a canal in the conductor material and contact points at the molecular level that lets electrons to flow more freely. This also allows the “Active Shielding” to work more efficiently yielding the maximum amount of low level information through the conductors and provides for the highest amount of realism in your music 5 day Burn-in: 2 step process 100% Hand Crafted in our California factory