£2,550

Atmosphere X Reference Rel Spec

Not just a cable, a system-wide upgrade. Atmosphere X REL Spec cables are a surprise breakthrough, much like SR power cords with a fantastic ability to improve nearly all aspects of system performance.

Listening notes taken during the development process listed deeper and tighter bass, so much so we were forced to turn down both of subwoofers in our reference system. Other improvements noted was a significant increase in soundstaging and most shocking, increased air and transparency in the high frequencies as well as a more fleshed out mid-range. To make this possible, all current SR Technologies are applied, including a new two-stage high voltage treatment process first developed for our World’s Reference Galileo SX cables and Atmosphere X Tuning Modules, used to voice your cable to your system and personal preference.

Also present are pure, handmade silver Air String Geometries and our latest Tricon Silver Matrix geometry with Teflon dielectrics. To improve upon the Atmosphere X Reference Rel Spec even further, connect the attached shield ground to a Synergistic Research Ground Block or just a standard wall outlet. In short, these new REL Spec cables should be at the top of the list to audition for anyone with REL Subwoofers wanting to get maximum performance not only in the lower registers but a complete upgrade to the sound of your system.

Specifications

Atmosphere X Reference Rel Spec Subwoofer Build Notes:
2 each 4th Gen-Tricon:Silver Copper Matrix: Mono-crystal conductors with a separate ground conductor from shield Dielectric: Teflon Shielding: Ground Plane Technology Geometry: 6 channel single ended / 8 channel balanced per pair Listened for signal direction before build
4 each Silver Air Strings XLR:Silver Air Strings: 99.9999% pure mono crystal silver conductor 1 separate conductor RCA / 2 separate conductors XLR Dielectric: Air (sealed) Shielding: Ground Plane Technology Hand crafted in our California factory
Speakon and Silver Spade Connectors:
Build Notes:21 point-to-point hand soldered connections Atmosphere X UEF Graphene Shield: 2 different UEF coatings with Graphene are applied to connectors and cabling and ground significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail. The conductors and ground plane also benefit from dampening effect that UEF provides Quantum Treatment: After the cable is completely assembled all connections and cabling are treated with 1,000,000 volts of electricity at specific frequencies and pulse modulations, creating a canal in the conductor material and contact points at the molecular level that allows electrons to flow more freely. This allows the maximum amount of low level information through the conductors and provides for the highest amount of realism in your music Secondary UEF Blue Treatment originally developed for SR Blue Fuses UEF Ground Plane Termination 1 Termination for Atmosphere tuning Module (Red and Blue) Hand build time: 2.5 hours 5 day Burn-in: 2 step process Hand crafted in our California factory
SR Ground Block (optional):Atmosphere X Reference Rel Spec Subwoofer interconnects have shields that can be grounded direct to earth with supplied ground cables bypassing your component’s power supplies for a lower system noise floor. To improve performance further still use an optional SR Ground Block with its UEF Ground Filter to elevate overall system performance; not only can you star ground and UEF filter the shields on all Atmosphere X 2-3 interconnects in your system, but can also ground all of your system’s components to the Ground Block for a dramatic lowering of your system’s noise floor for greater detail, clarity and musicality.