Synergistic Research
£2,150

Atmosphere X Reference

After perfecting the most natural-sounding and holographic cables in our history, we set out to take them further with a new high voltage conditioning process that applies a sweeping frequency plot for an extended duration.

After perfecting the most natural-sounding and holographic cables in our history, we set out to take them further with a new high voltage conditioning process that applies a sweeping frequency plot for an extended duration. We experimented with dozens of frequencies in different combinations over a prolonged time period before landing on just the right mix. We even built a new Tesla Coil to handle the excess heat generated during long conditioning sessions. Once finalized, the SRX conditioning process created holographic realism and timbrel accuracy far beyond our previous Tesla Coil conditioning protocol.

Specifications

Atmosphere Subwoofer Build Notes:
1 each 4th Gen-Tricon RCA, 2 each 4th Gen-Tricon XLR:Silver Copper Matrix: Mono-crystal conductors with a separate ground conductor from shield Dielectric: Teflon Shielding: Ground Plane Technology Geometry: 6 channel single ended / 8 channel balanced per pair Listened for signal direction before build
1 each Silver Air Strings:Silver Air Strings: 99.9999% pure mono crystal silver conductor 1 separate conductor RCA / 2 separate conductors XLR Dielectric: Air (sealed) Shielding: Ground Plane Technology Hand crafted in our California factory
1 each Tungsten Air Strings:Tungsten Air Strings: 99.99% pure conductor 1 individual conductor RCA / 2 individual conductors XLR Dielectric: Air (sealed) Shielding: Ground Plane Technology Hand crafted in our California factory
RCA and XLR Connectors:Silver Teflon SR 20 RCA or Neutrik NC3FX-BAG, NC3MX-BAG XLR connectors
Build Notes:15 (RCA) 21 (XLR) point-to-point hand soldered connections Atmosphere X UEF Graphene Shield: 2 different UEF coatings with Graphene are applied to connectors and cabling and ground significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail. The conductors and ground plane also benefit from dampening effect that UEF provides Quantum Treatment: After the cable is completely assembled all connections and cabling are treated with 1,000,000 volts of electricity at specific frequencies and pulse modulations, creating a canal in the conductor material and contact points at the molecular level that allows electrons to flow more freely. This allows the maximum amount of low level information through the conductors and provides for the highest amount of realism in your music Secondary UEF Blue Treatment originally developed for SR Blue Fuses UEF Ground Plane Termination 1 Termination for Atmosphere tuning Module (Red and Blue) Hand build time: 2.5 hours 5 day Burn-in: 2 step process Hand crafted in our California factory
SR Ground Block (optional):Atmosphere Reference Subwoofer interconnects have shields that can be grounded direct to earth with supplied ground cables bypassing your component’s power supplies for a lower system noise floor. To improve performance further still use an optional SR Ground Block with its UEF Ground Filter to elevate overall system performance; not only can you star ground and UEF filter the shields on all Atmosphere 2-4 interconnects and speaker cables in your system, but can also ground all of your system’s components to the Ground Block for a dramatic lowering of your system’s noise floor for greater detail, clarity and musicality.