£650
Bronze W10
If you love deep and refined bass notes, the Bronze W10 is a must-have addition to your speaker set-up as every soundscape is effortlessly reinforced by our beautifully designed subwoofer.
Specifications
System FormatLong-throw 10" driver featuring ‘dished’ C-CAM cone. 10" flat panel ABR (Auxiliary Bass Radiator).
18 mm M.D.F. internally braced construction
Upper Frequency Limit-6 dB @ 150 Hz
Linear Driver Excursion17 mm peak to peak
Amplifier ClassificationClass D with high current Switch mode power supply (SMPSU)
Low Pass Filter Alignment4th order (24 dB/Octave), from 50 Hz to 120 Hz
Auto SensingLine Level >3mV. Auto Standby feature after 20 mins
Input Impedance20 kOhms input impedance
Electrical CertificationsCE / CB / ETL / Fcc / CCC / ErP (Energy saving compliant)
Power ConsumptionMaximum 300 W, Standby <0.5 W (ErP compliance)
External Dimensions (Including Amp, Drivers and Terminals (H x W x D))321 x 321 x 364 mm (125/8 x 125/8 x 145/16")
Weight (unpacked)13.4 kg (29 lb 9 oz)
Lower Frequency Limit-3 dB @ 33 Hz / -10 dB @ 28 Hz (Free Field) Default preset: Music, -3 dB @ 29 Hz / -10 dB @ 25 Hz (In Room)
Drive Unit Complement1 x 250 mm (10") C-CAM subwoofer driver featuring a 2" long throw voice coil
Amplifier Output220 W
Phase Control0 Degrees & 180 Degree pure Invert
Equalisation DSP3 pre-set modes: Music, Movie, Impact
Audio Input/OutputsLFE unbalanced input RCA
Stereo unbalanced inputs RCA
12 V Trigger3.5 mm mono mini-jack. 6 V threshold
Mains Input Voltage110 – 120 Vac 50 – 60 Hz / 220 – 240 Vac 50 – 60 Hz (Manually selected)
Fuse Type20 mm T4AL 250 VAC
External Dimensions (Including Amp, Drivers, Terminals and Feet (H x W x D))366.5 x 321 x 364 mm (147/16 x 125/8 x 145/16")
Sold AsSingle Unit