Loreley Mk III
The Loreley MK III is designed to bring you closer to the “concert experience” that our flagship Gaudi provides, but in a smaller cabinet and at a lower price. Like the Gaudi, the Loreley MK III is capable of reproducing sound levels up to 120dB, which allows live music dynamics to be more realistically reproduced. At the same time it can accurately reproduce the low-level detail and delicate nuances that are the essence of a musical performance.
The Loreley MK III uses four DDD drivers, two 12-inch woofers and four 10-inch passive radiators to produce a truly emotionally involving musical performance
The Loreley MK III is designed to be bi-amped using an active crossover. This means that it uses two power amplifiers to directly drive each loudspeaker: one for the DDD drivers and one for the woofers. The signal split for each section is performed at low level using the new German Physiks Extreme digital active crossover, which is supplied with the Loreley. This is pre-configured at the factory so all the customer has to do is connect it into the system and switch it on. The customer may if they wish manually adjust the crossover’s settings. A number of set-up memories are provided to allow customer set-ups to be stored and then recalled when required.
Active operation provides a much higher level of performance than is possible with a passive crossover and allows the full potential of this high quality design to be realised.
Independent Bass Enclosures
Each loudspeaker has two large independent bass enclosures mounted one on top of the other, which stand between a top and a bottom plate. None of these components is attached to the other using screws or any form of hard connection, but are held together by an interlocking collar arrangement. This greatly reduces resonances and also makes the column more difficult to topple. Each enclosure is fitted with a 12-inch inverted dome driver that has a maximum excursion of 3 inches. Distortion levels are typically a tenth of those of conventional 18-inch sub woofers at comparable output levels. In addition, their acceleration and transient responses are far superior due to the immense magnetic forces generated by the massive rare earth magnets we use and to the very high stiffness of the dome diaphragms. The net result is a system with a very extended and very clean low frequency response, that is also capable of prodigious output levels, exceeding 110dB at 18Hz.
Freedom from Power Compression
Power compression, the reduction in dynamic range caused by heating of the voice coil, is much reduced over conventional woofer drivers due to the ultra-wide, under-hung voice coil and triple magnet structure we employ. Power handling is also correspondingly greatly increased over that of conventional design