Fyne Audio
£299.99

FA502iC LCR

The LCR version of the prestigious FA502iC home install loudspeaker has been designed for custom installations where speaker placement is offset from the listening position.

The LCR version of the prestigious FA502iC home install loudspeaker has been designed for custom installations where speaker placement is offset from the listening position. Ideal for Left, Centre and Right channels of home theatre systems, the 200mm (8”) IsoFlare driver is angled at 15 degrees to the mounting surface. The driver can be orientated in the round cut-out to angle the output directly towards the main listening position. With the same easy fitment, power and performance benefits of the standard FA502iC, the LCR model builds on the range’s versatility and is supplied with a paintable, low profile round grille.

Specifications

System Type2 way IsoFlare loudspeaker for in-ceiling or in-wall application angled dispersion for LCR applications
Recommended amplifier power (Watt RMS)30 - 150
Peak power handling (Watt)300
Continuous power handling (Watt RMS)75
Sensitivity (2.83 Volt @ 1m)91dB
Nominal impedance8 Ohm
Frequency response (-6dB typical in room)35Hz - 34kHz
Drive unit complement1 x 200mm (8”) IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround with 25mm titanium dome compression tweeter
Crossover frequency1.7kHz
Crossover typePassive 2nd order low pass, 1st order high pass
Dimensions - Dia x Depth278 x 157mm (10.9 x 6.2”)
Square grille dimensionsNot Available
Round grille diameter288mm (11.3”)
Cut-out diameter255mm (10.0”)
Depth behind mounting surface155mm (6.1”)
Clamp travel0 - 26mm (0 - 1.0”)
Suggested min volume18 L
Weight - Each2.4kg (5.2lbs)